You discovered our blog Emergency First Responders. Please Remember to bookmark this page Heater Heater. If you enjoy our post Heater Heater, show your love by hitting one of the social media buttons above for this page.
![]() Kaz/Yantian HZ-370GP PROGRAM CERAMIC HEATER US $63.46
|
![]() MR HEATER JR US $95.00
|
![]() BATHROOM SPACE HEATER AUTO-SET THERMOSTAT ALCI-PLUG New US $56.99
|
![]() Coleman SportCat PerfecTemp Catalytic Heater US $50.00
|
Heater Heater
12 rocket stove mass heaters - efficient wood heat
Stiebel Eltron Tempra 12 Electric Tankless Hot Water Heater
This model, the Stiebel Eltron Tempra 12 Electric Tankless Water Heater is one of the most popular and as well as economical thermostatically controlled point of Tankless Hot Water Heater used for low flow applications such as in the powder room or restroom sink for example or even in kitchen sink, shower etc.
Aside from producing unlimited supply of hot water, it keeps heating water instantly as you need it. Like other Tank less electric Water Heater, the Tempra 12 system replaces a conventional tank Water Heater with no disruption to your comfort on your hot water needs.
In this unit of electric Tankless Water Heater, the Tempra 12 is energy saving and as well reduce your electric bill. Having this Tempra 12 Tankless Water Heater, you can save up to 15 – 20% of your kWh used. It is also a space saving design where you can save valuable living space and has a control temperature by setting a Dial.
The Stiebel Eltron Tempra 12 electric Tankless Water Heater has an excellent performance and has several temperature and flow sensor which feed their reading into the unit proprietary microprocessor control. Its heating elements are engaged in stages achieving the temperature you desire and monitor the water temperature it produces.
Here are the specifications of the Stiebel Eltron Tempra 12 electric Tankless Water Heater:
- Nominal Water Volume – 0.13 gallon or 0.5 Liters
- Minimal Required Circuit Breaker Size – A 60
- Maximum Temperature Increase – 1.50 GPM 41
- Voltage – 208 V
- Watts – 9 kW
- Amperage – 60 Amp
- Recommended Wire Size – 6 AWG Copper
- Above Ambient Water Temp- 27 @ 2.25 GPM, 20@ 3.00GPM,
- Weight – 13.2 Lbs
- Min. Water Flow to activate init – 0.37 GPM/min
- Max. Inlet Temperature – 131 degree F
- Width – 16 5/8"
- Height- 14.5"
- Water Connection – ¾" NPT
Take note: the voltage, amperage as well as the circuit breaker specification must be met for the heater to work. Before purchasing any electric Tankless Hot Water Heater be sure that all the requirements are met so that it will have a great performance on your hot water.
Having all the requirements for sure your Tempra 12 electric Tankless Hot Water Heater will work perfectly and what is good in this kind of Water Heater is that, it has a true thermostatic temperature control and full modulation based on both the incoming water temperature and to the water flow rate. It will automatically adjust its power output in order to accommodate changes in the incoming water temperature and as well as the flow rate which maintain the desired output temperature.
So what are you waiting for, go and shop around for your electric Tankless water of your choice according to your budget and be sure it will work well and has a warranty so that if in case you have some complain like not heating on its desired heat, you can change it immediately. Shopping is one of the best ways to do before purchasing any electric Tankless Heater.
You can also have your window shopping online through the internet just in case you have no time to shop around.
For more see powerstar electric tankless water heater and Paloma tankless hot water heater.
If you are looking for a different item here are a list of related products on Emergency First Responders, please check out the following:

Frequently Asked Questions...
What size water heater do i use for my four person hot tub?
I moved into a house that has a four person hot tub but has no water heater. What size water heater do i buy? It is a four person tub, im ot sure how many gallons of water it holds though.
Answer:
Our four-person hot-tube requires a 5KW, 240V in-line heater. Which, as it happens, is the same as our 2-person hot-tub. They range from 1.5KW to 5.5KW as standard units.
For the most part, the heaters are built into the control units - you will see a shiny (stainless steel) tube about 1-1/2" in diameter as part of the system, usually on the discharge side of the pump, sometimes fully integrated into the controls, sometimes bolted to the bottom, but with the power-connection within the control unit. The heating element (typically a Calrod-type) is within that tube.
When in doubt, however, or if the unit is more than about 15 years old, it will likely pay you to replace the entire system with a modern digital system that includes in-line sensors and controls. There are _many_ sources for these units. We replaced the controls for both our units (each pushing 20 years old) with Balboa units a few years ago and have been very, very pleased with the results. They were true drop-in replacements that came with all the necessary parts to replace the old unit, controls and cables, and with very simple and clear instructions. All we had to supply was the silicon sealant for the new control head.
NOTE: Unless you are comfortable around and understand electricity, DO NOT mess with hot-tub control units. You will need a Ground Fault breaker of the correct type and rating for the system you choose, and you will have to make the correct connections per code. Again, unless you know exactly what you are doing - leave this part to an expert. Your life truly depends on it.
























































































